LED Replacement in Illuminated Boards is a Simple Task that with Basic Instructions Can be Done Independently without Requiring a Professional

for that . All you need is a soldering iron and tin.

The LED backing board for memorial plaques needs to be changed. Each plaque has an attached LED. What's needed is a LED strip package 4.5/5.5 ampere

Per meter. By cutting numbers in the center of the copper strip that appears on the LED strip. .

Remove the adhesive tape and fold the head of the LED tape back.

Point to the hole of the flame lighting and stick the LED lamp on the hole so that it illuminates it. Take a tin, moisten the soldering iron

with the solder and solder the small copper strips.

Disconnect the electrical wires from the old LED using the heat of the soldering iron and solder the copper strips again to connect the electrical wires.

for the new child.

Likewise, regarding a long strip that was burned, you don't have to replace everything, but only what was burned, cut and soldered together

Professional soldering order

  1. Electric wire carving

  2. Applying solder paste to the wire

  3. Soldering the wire with tin

  4. Soldering the desired area with tin

  5. Connecting the wire in the soldering area with a small touch of the soldering iron